|
|
 |
::::: |
RF Front End Modules |
::::: |
 |
| Epicom provides fully-integrated RF front-end modules for various types of wireless RF applications. In addition to having industry-leading RF front-end performance, Epicom modules replace mass majority of RF components in typical designs. These modules meet all performance requirements and reduce overall BOM cost for 802.11 products and work with currently-available transceiver chips. The FM2422 is a fully integrated low-current RF FEM designed for 2.4 GHz 802.11b/g WLAN applications where low operating current is desired for long battery life and higher reliability such as handheld PDAs and smart phones. The FM2423 provides higher power up to +22 dBM with the best overall efficiency. Biasing and matching circuitry are all integrated in a low cost standard QFN package, 4mm by 4mm by 0.8mm, to minimize the external components required. For dual-band applications, the FM7704 provides low current operation at 2.4 and 5 GHz while the FM7705 provides higher power for dual-band applications. These fully-integrated modules are supplied in a miniature 5mm by 5mm by 0.8mm QFN package. Epicoms RF FEMs are designed to be compatible with most available 802.11a/b/g chipsets from leading wireless chip companies. The modules are easily adoptable by OEMs, ODMs, and CMs and can eliminate major yield loss by providing pre-screened and guaranteed performance levels.
|
|
 |
|
 |
|
|
 |
FM2491-FC 2.4~2.5 GHz RF Front-End Module |
|
|
 |
| Features |
•2.4 to 2.5 GHz Operating Range
• 34 dB Gain (Note: versions with 30 dB gain and 25 dB gain are also available)
• 3% EVM at Pout=+17 dBm (Icc=120mA@ Vcc=+3.3V) at 54 Mbps OFDM signal
• 4% EVM at Pout=+18 dBm (Icc=135mA@ Vcc=+3.3V) at 54 Mbps OFDM
• Excellent performance over temperature (-25°C to +85°C)
• Single chip MMIC
• Low current dissipation
• Single-supply, low-voltage battery operation (2.7V – 4.8V)
• CMOS compatible control logic (control voltage range is 1.6V – 2.1V)
• RoHS compliant product
Applications
• IEEE 802.11b/g WLAN
• 2.4 GHz Cordless Phones
• 2.4 GHz ISM Radios
• 2.4 GHz Smart Phones |
|
|
|
|
|
FM2422 2.4~2.5 GHz RF Front-End Module |
|
|
|
| Features |
• 2.4 to 2.5 GHz Operating Range
• 24 dB Gain
• 802.11b/g ACPR compliant up to +18dBm
• 3% EVM at Pout=+13.5 dBm with low
Icc=48mA at 54 Mbps OFDM signal
• On-chip power detector
• +3.3V Supply
• Miniature size:4 x 4 x 0.8 mm 24-pin
• RoHS compliant product
Applications
• IEEE 802.11b DSSS WLAN
• IEEE 802.11g OFDM WLAN
• 2.4 GHz Cordless Phones
• 2.4 GHz ISM Radios |
|
|
|
|
|
FM2422U 2.4~2.5 GHz RF Front-End Module |
|
|
|
| Features |
• 2.4 to 2.5 GHz Operating Range
• 24 dB Gain
• 802.11b/g ACPR compliant up to+18dBm
• 3% EVM at Pout=+14.5 dBm with low
Icc=60mA at 54 Mbps OFDM signal
• On-chip power detector
• +3.3V Supply
• Miniature size:4 x 4 x 0.5 mm 24-pin
• RoHS compliant product
Applications
• IEEE 802.11b DSSS WLAN
• IEEE 802.11g OFDM WLAN
• 2.4 GHz Cordless Phones
• 2.4 GHz ISM Radios
|
|
|
|
|
|
FM2427 2.4~2.5 GHz RF Front-End Module |
|
|
|
| Features |
•2.4 to 2.5 GHz Operating Range
•25 dB Gain
•3% EVM at Pout=+16 dBm (Icc=130mA @Vcc=+3.3V) at 54 Mbps OFDM signal
•Input and Output Matched to 50ohm
•On-chip power detector
•+3.3V Supply
•FM2427 : 3 x 3 x 0.8 mm 16-pin QFN Package
•FM2427U : 3 x 3 x 0.5 mm 16-pin QFN Package
•RoHS compliant product
Applications
•IEEE 802.11b DSSS WLAN
•IEEE 802.11g OFDM WLAN
•2.4 GHz Cordless Phones
•2.4 GHz ISM Radios
|
|
|
|
|
|
FM7705 802.11a/b/g/n dual-band RF Front-End Module |
|
|
|
| Features |
•Meets all 802.11a/b/g RF front-end module performance requirements.
•Transmit path filters eliminate unwanted harmonics to meet FCC requirements.
•Works with most transceiver RFIC architectures.
•Replaces over 50 discrete and IC components with one single front-end module.
•Eliminates major yield loss for card module sub-system, system, and motherboard by providing pre-screened and guaranteed performance spec at module level.
•Receive Path
Broadband LNA and Rx diplexer
Noise Figure ＜ 3dB
•LB (2.4 to 2.5 GHz) Transmit Path
27 dB Gain, P1dB=+22 dBm (Typical)
802.11b/g ACPR compliant to 20 dBm
•HB (4.9 to 6.0 GHz) Transmit Path
22 dB Gain, P1dB=+21 dBm (Typical)
802.11a ACPR compliant to 20 dBm
•On –chip power detector
•+3.3V Power Supply
•5 x 5 x 0.8 mm 20-pin QFN Package
•RoHS compliant product
Applications
•IEEE 802.11a / b / g / n 1T1R
•IEEE 802.11a / b / g WLAN |
|
|
|
|
